COLOR EFFECTS

Introduction:

The VJX16-4 allows you to edit each track independently:

• To tune the Balance and the Offset of Red, Green, Blue (RGB).
• To tune the Brightness the Contrast and the Saturation (BCS).
• To convert the video into Black and White.
• To invert the colors (negative effects).

Here are the controls which you will need to configure these effects:

First of all, choose which track you wish to modify or apply a color effect to. For this, press the SELECT button of the track which you desire (see the Select Function chapter).

Balance Effects / RGB Offset :

To modify the RGB Balance or the RGB Offset on the video of the selected track, press the RGB button. This button will then light up green. By pressing the button successively you will switch from one context to another (display the context RGB Balance or RGB Offset mode).

Colors (RGB Balance)

This effect allows you to tune the RED, Green and Blue gains of the selected video.

Here are the controls which you will need to configure the RGB Balance effect:

The LCD screen will then display the RGB Balance menu:

Helpful Hints:

• These 3 parameters are included in the range of values [0 ; 255], 128 being the default value (no effect added).
• Modify the parameters: R (Red), G (Green) and B (Blue) with the 3 knobs on the left.

Offset of colors (RGB Offset)

This effect allows you to tune the hue of Red, Green and Blue which will be added to the selected video.

Here are the controls which you will need to configure the RGB Offset effect:

The LCD screen will then display the RGB Offset effect menu:

Helpful Hints:

• These 3 parameters are included in the range of values [-255 ; 255] 0 being the default value (no hue added).
• Modify the parameters R (Red), G (Green) and B (Blue) with the 3 knobs on the left.

BCS Balance Effect:

To modify the BCS Balance effect on the selected video, press the BCS button. This button will then light up green.

This effect allows you to modify the Brightness, the Contrast and the Saturation of the selected video.

Here are the controls which you will need to configure the BCS Balance effect:

The LCD screen will then display the BCS Balance menu:

Helpful Hints:

• These 3 parameters are included in the range of values [0 ; 255], 128 being the default value (no effect added).
• Modify the 3 parameters B, C and S with the 3 knobs on the left.

Negative effect (color inversion) :

To invert the colors of the video of the selected track, use the Negative button. When the red LED button is illuminated, the colors of the video are inverted.

Black & White effect:

To convert the video of the selected track into Black and White, use the B&W button. When the red LED button is illuminated, the video is converted into Black and White.